Drinking and service water
stainless steel lines in commercial, industrial and public buildings.
Geberit Mapress: press-fit joints instead of welds.
We design and install piping with the Geberit Mapress press-fit system in stainless steel, carbon steel and copper. The joint is pressed cold, with no welding and no naked flame: fast to install, even in buildings in use.
Services · Geberit Mapress
What we use Mapress for
Heating and cooling
closed circuits in carbon steel or stainless steel.
Compressed air and technical media
supply networks in workshops and production plants.
Alterations during operation
no hot work, no fire watch, short interruptions.
System and materials
Geberit Mapress is a press-fit system made up of pipes, press fittings and seal rings. The fitting is pushed onto the pipe and permanently pressed with the pressing tool.
| Material | Typical application |
|---|---|
| Stainless steel | Drinking water, compressed air, technical media |
| Carbon steel | Heating, cooling, closed circuits |
| Copper | Drinking water, heating |
Depending on the material, the system covers outside diameters up to 108 mm. Before quoting, we clarify which material and which seal ring suit the medium.
Why press instead of weld
Pressing and welding complement each other. Where pressure, temperature or medium require it, we weld; where a press-fit joint is sufficient, it is faster and cleaner.
- No hot work — no welding, no naked flame, no hot-work permit.
- Short installation time — a press-fit joint is made in a few seconds.
- Clean site — no fumes, no grinding dust, suitable for buildings in use.
- Verifiable — every joint is marked after pressing and checked in the pressure test.
Step by step
How we work
- Step 01
Clarification
medium, pressure, temperature, material and seal ring.
- Step 02
Design
routing, bill of materials, supports.
- Step 03
Installation
cut, deburr, insert, press.
- Step 04
Pressure test and handover
test record and documentation as agreed.
FAQ
Frequently asked questions
What is Geberit Mapress?
A press-fit system for piping in stainless steel, carbon steel and copper. Pipe and fitting are pressed cold, with no welding and no naked flame.
What is Mapress suitable for?
For drinking water, heating, cooling, compressed air and technical media in commercial, industrial and public buildings. We check before quoting whether the system suits the medium.
When do you weld and when do you press?
We weld where pressure, temperature, medium or hygiene requirements demand it, for example on process lines. We press where a press-fit joint is permitted and installation has to be fast and free of hot work.
Do you install Mapress for private individuals?
No. We work for industrial companies, architects, construction companies and public bodies.
Read on
Related topics
Contact
Let's talk about your project.
Hohenrainstrasse 10b, 4133 Pratteln · Mon–Fri 07:00–12:00 and 13:00–16:00